A TrueCrypt hidden volume exists within the free space of a typical TrueCrypt volume. Given then the ‘outer volume’ is accessed it is (almost) impossible to determine if there is a hidden volume within it. This is because TrueCrypt always ﬁlls the empty space of an encrypted volume with random data. So a hidden volume looks the same as an empty TrueCrypt volume.
To create and use a hidden volume you need two passwords -one each for the outer and inner (hidden) volumes. When you mount (open) the volume you can use either password and that will determine which of the two is opened. If you want to open just the hidden volume you use one password, and if you want to access just the non-hidden encrypted volume you use the other password.
To create a hidden volume open TrueCrypt and press the ‘Create Volume’ button:
The options for half of this process are almost the same as for setting up a standard TrueCrypt volume and then the process continues for setting up the hidden volume but lets go through the entire process step by step anyway. In the screen shown below you just want to stay with the default setting ‘Create an encrypted ﬁle container’:
Press ‘Next >’ and continue to the next screen.
In the above screen you want to be sure that you choose the second option ‘Hidden TrueCrypt Volume’. Select this and click on ‘Next >’ you will then be asked to choose the location and name of the TrueCrypt outer volume.
Click ‘Select File. . . ’ and browse to a location for a new TrueCrypt volume. We will use the name ‘myencryptedﬁle’ in this example. Its the same name as we used in the
last example so be aware that if you have just followed those instructions you must now create a new volume with a new name.
Browse to the directory where you want to put the outer volume and enter the name of the volume in the ﬁeld named ‘Name’ as in the example above. When you are satisﬁed all is well click on ‘Save’. The ﬁle browser will close and you return to the Wizard. Click ‘Next >’. Here you are presented with some very technical choices. Don’t worry about them. Leave them at the defaults and click ‘Next >’. The next screen asks you to determine the size of the outer volume. Note that when you do this the maximum inner ‘hidden’ volume size is determined by TrueCrypt. This maximum size will of course be smaller that the size you are setting on this screen. If you are not sure what the ratio of outer volume size to inner (hidden) volume size is then go through the process now as a ‘dummy’ run -you can always trash the encrypted volume and start again (no harm done).
So choose the size of the outer volume, I will choose 20MB as shown below:
You cannot set the outer volume size to be larger than the amount of free space you have available on your disk. TrueCrypt tells you the maximum possible size in bold letters so create a volume size smaller than that. Then click ‘Next >’ and you will be taken to a screen asking you to set a password for the outer (not the hidden, this comes later) volume.
Enter a password that is strong (see the chapter on creating good passwords) and press ‘Next >’. Next TrueCrypt wants you to help it create the random data it will ﬁll the volume up with. So wave your mouse around, browse the web, and do whatever you want for as long as you can. When you feel TrueCrypt should be happy then press ‘Format’. You will see a progress bar zip by and then you will be presented with the next screen:
You can open the outer volume if you like but for this chapter we will skip that and go ahead to create the hidden volume. Press ‘Next >’ and TrueCrypt will work out how the maximum possible size of the hidden volume.
When you see the above screen just press ‘Next >’. Now you must choose the encryption type for the hidden volume. Leave it at the defaults and press ‘Next >’.
Now you will be asked to choose the size of the hidden volume.
I have set (as you see above) the maximum size as 10MB. When you have set your maximum size press ‘Next >’ and you will be prompted to create a password for the hidden volume.
When creating the password for the hidden volume make sure you make it substantially diﬀerent fro the password for the outer volume. If someone really does access your
drive and ﬁnds out the password for the outer volume they might try variations on this password to see if there is also a hidden volume. So make sure the two passwords are not alike.
Enter your password in the two ﬁelds and press ‘Next >’.
Leave this window at the defaults and press ‘Next >’ and you will be presented with the same screen you have seen before to generate random data for TrueCrypt. When you are happy click ‘Format’ and you should see the following :
The TrueCrypt manual it is referring to is not this manual. They mean this manual : http://www.truecrypt.org/docs/
Click ‘OK’ and keep and exit TrueCrypt. You can now mount the volume as noted in the previous chapter.